Skip to product information
Hybrid gel Clear
Size
In stock

explore a wide range of shades to match every style.

Product Description:

Its is not just clean, it’s crystal clear ✨ must have in your collection, great for encapsulating glitter or toe nail reconstruction to be able to monitor nail health underneath 

Free from HEMA, Di-HEMA, TPO, IBOA & IBOMA.

Unleash your creativity with our Professional Builder Gel – designed to deliver an incredibly light, natural feel on the nails. Its flexible self-levelling viscosity works both as a base and a builder (ceramic base coat highly recommend for perfect adhesion), making it perfect for flawless extensions or natural nails overlays. This innovative, high-performance formula is the future, described as 70% hard gel and 30% soft gel  – giving you strong, beautiful, and natural-looking extensions with ease. 

Design in UK made in EU

How To Use

The application process is very simple. However, it is important to keep a few factors in mind beforehand. Before the actual application, perform a nail diagnostic.

iIf the nails are healthy and undamaged, follow these steps:

1.Disinfect the nails and hands (Pro Sanitiser) – Before every nail treatment, spray and disinfect hands and nails with a sanitising product.
2.Perform a classic nail preparation (cuticle care, buffing the nail plate) – Use a cuticle pusher to gently push back the cuticles and remove as much cuticle as possible from the nail bed. Trim any excess cuticle with cuticle scissors. Use 240 grit nail file to prep the whole nail plate before applying the product.


3. The builder gel can be applied on natural nails, nail forms, or tips – depending on your preference. It is suitable for strengthening natural nails as well as extending them to the desired shape


4. Cleanse and degrease the nail with a acetone. Thoroughly wipe the entire nail plate, including the nail side walls (the areas along the sides of the nail). Important: Do not touch the cleaned nail afterwards.


5. Apply a thin layer of ceramic base coat. apply a very thin layer of gel onto the prepared nail - try to “rub” a product into nail plate for better adhesion and than final fixation layer. Cure for 60 seconds in a dual wavelength UV/LED lamp (48W or higher).


6. Apply a thin slip layer (don’t cure yet) and than “bead” of gel with a brush onto the slip layer and gently spread it over the entire nail. Concentrate a thicker layer along the center length of the nail, then lightly spread it towards the sides. To apply gel around the cuticle area, you can use a detail brush. Application is simple thanks to the gel’s self-leveling properties. Before curing the nail in the lamp, briefly turn it upside down (180°) – the self-leveling gel will create a perfect shape, eliminating the need for additional filing.


7. Cure in a dual wavelength UV/LED lamp (48W or higher) for 90 seconds -low heat mode , or in a traditional UV lamp for 2–4 minutes. Recommendation: after finishing whole hand cure for additional 30 seconds to prevent any under curing issues .After curing wipe nail with acetone and apply color or top coat (no need to buff a nail )

Removal

REMOVAL:

The gel is only partysoak-off, so most if the gel must be filed off.TIP: If you are using remover and removal foils soak gel for at least 20 minutes, the gel will soften nicely, making filing easier. However, it is necessary to buff the top layer (TOP) first. The removal process also depends on the materials used, the thickness of the gel layer, and the condition of the nails. We highly recommend to infill instead of fully removal to keep your natural nails in the best possible condition

Safety Information

This product is not suitable for children. Keep out of reach of children.
2.Avoid contact with skin. The product should only be applied to the nail and not the surrounding skin. If contact occurs, wash with soap and water before curing. If skin irritation occurs, seek medical advice.
3.Avoid contact with eyes. If contact occurs, rinse thoroughly with water for several minutes and, in case of eye irritation, seek medical attention.
4.Do not use this product if you are allergic or have previously experienced an allergic or unusual reaction to gel products.
5.Always use disinfectant and wear protective gloves during application.
6.Recommended storage: Keep tightly closed at room temperature, away from direct sunlight. Avoid exposure to UV/LED lamps (even outside of curing lamps), as this may cause partial curing and reduce product performance.
7. Keep away from heat.
8.Ensure proper ventilation/extraction at the workplace.

Expiry Date

After opening use within 12 months

For professional use only

Fast Shipping

Secure payment

Trusted

Ingredient List

You may also like