Hybrid gel Pixi

£20.45

Product Description:

Iridescent semi-translucent base sparkles with multidimensional shimmer, shifting under every angle for a radiant, ethereal finish.✨

Hybrid Builder Jam – Our Signature Formula

Formulated without added HEMA, Di-HEMA, TPO, IBOA, HPMA & IBOMA.

Unleash your creativity with our Hybrid Builder Gel – Nail Jam’s signature formula designed to combine flexibility, strength and effortless application.

With its self-levelling builder-gel viscosity, it’s easy to control and perfect for both natural nail overlays and extensions.

Think of it as the best of both worlds: approximately 70% hard gel and 30% soft builder gel, giving you the workable consistency and flexibility of a builder gel with the added strength and durability associated with hard gel.

A modern hybrid formula created for nail professionals who want versatility without compromising on performance.

Requires Base coat - HEMA Free Rubber base, Rubber base "Super Stick", Hard Base coat ( ideal for people with previous history of allergic reactions)

Designed in the UK • Made in the EU

Watch detailed application guide here

SDS here: https://cdn.shopify.com/s/files/1/0970/5527/7385/files/UK_SDS-_Glitter_chromatic_builder_hybrid.pages?v=1767287781

The application process is simple, but always perform a nail diagnostic first. Only apply the product to healthy, undamaged nails.

Application

Sanitise
Disinfect the hands and nails using Pro Sanitiser.
Prep the nail
Push back and remove excess cuticle, then gently buff the entire nail plate using a 240-grit file.
Choose your application
Builder Gel can be used for natural nail overlays, nail forms or tips, making it suitable for both strengthening and extensions.
Cleanse & dehydrate
Thoroughly cleanse the nail plate and sidewalls with acetone or alcohol cleanser. Do not touch the nail afterwards.
Apply your base
Apply a very thin layer of Hard Base Coat or HEMA-Free Rubber Base, gently rubbing it into the nail plate for maximum adhesion. Cure for 60 seconds in a dual-wavelength UV/LED lamp (48W+).
Build the nail
Apply a thin slip layer without curing. Add a bead of Builder Gel and gently guide it over the nail, concentrating more product through the centre/apex. Use a detail brush around the cuticle if needed. Turn the nail upside down briefly to allow the gel to self-level into shape.
Cure & finish
Cure for 90 seconds on Low Heat Mode in a dual-wavelength UV/LED lamp (48W+). Once the full hand is complete, we recommend an additional 30-second cure.

Wipe with acetone, then apply your chosen colour or top coat. No buffing is required.

file-off

1.This product is not suitable for children. Keep out of reach of children.
2.Avoid contact with skin. The product should only be applied to the nail and not the surrounding skin. If contact occurs, wash with soap and water before curing. If skin irritation occurs, seek medical advice.
3.Avoid contact with eyes. If contact occurs, rinse thoroughly with water for several minutes and, in case of eye irritation, seek medical attention.
4.Do not use this product if you are allergic or have previously experienced an allergic or unusual reaction to nail polish.
5.Always use disinfectant and wear protective gloves during application.
6.Recommended storage: Keep tightly closed at room temperature, away from direct sunlight. Avoid exposure to UV/LED lamps (even outside of curing lamps), as this may cause partial curing and reduce product performance.
7.Keep away from heat.
8.Ensure proper ventilation/extraction at the workplace.

REMOVAL:

The gel is only partysoak-off, so most if the gel must be filled off.TIP: If you use a remover and removal foils for at least 20 minutes, the gel will soften nicely, making filing easier and gentler. Thinner layer canbe removed without filing . However, it is necessary to buff the top layer (TOP) first. The removal process also depends on the materials used, the thickness of the gel layer, and the condition of the nails. We highly recommend to infill instead of fully removal to keep your natural nails in the best possible condition