1. Nail Preparation
Push back and prepare the cuticles as usual.

When working with HEMA-free products, thorough nail preparation is essential for optimal adhesion. Carefully etch the natural nail plate using a 180/240 grit file, ensuring all shine is removed. Take your time with this step, as proper preparation is key to long-lasting results.

Cleanse and dehydrate the nail plate using isopropyl alcohol or acetone.

2. Base Coat Application
Apply a thin layer of base coat using gentle rubbing motions, ensuring the entire nail plate is covered.

For best results, we recommend using our HEMA-Free Rubber Base, as it provides excellent adhesion and versatility.

Cure for:
- 60 seconds in an LED lamp
- 120 seconds in a UV lamp

---

3. Hard Jams Application
Apply a thin slip layer of Hard Jams and do not cure.

Immediately follow with a bead of Hard Jams, distributing the product evenly across the nail while building the desired apex structure.

Professional Tip:
Work on one nail at a time. After applying the builder layer, turn the client's hand upside down for a few seconds. Gravity will help create a perfectly balanced apex.

Use a liner brush to guide the gel closer to the cuticle area and to fill any gaps along the sidewalls for a flawless finish.

4. Curing
Cure in a dual-wavelength lamp (365–405 nm):

- 99 seconds on low heat mode in an LED lamp
- 120 seconds in a UV lamp

Professional Tip:
Once all five fingers have been completed, cure the entire hand for an additional 30 seconds. This helps ensure complete polymerisation and reduces the risk of under-curing.

For optimal curing performance, replace professional-use lamps approximately every 12 months, as LED output gradually decreases over time with regular use.

5. Finishing
After curing, remove the inhibition (sticky) layer using isopropyl alcohol or acetone.

Lightly buff the surface to create a smooth matte finish before applying colour gel or top coat.

Your nails are now ready for the next step of your service.